It is inevitable that there will be some faults when driving out for tourism. It is necessary for us to take some emergency repair methods temporarily. Here are some simple emergency repair tips.
1. The fuel tank is damaged. When the motor vehicle is in use, it is found that the fuel tank leaks oil, the oil leakage can be cleaned, and the oil leakage can be coated with soap or bubble gum to block temporarily; The effect is better when repaired with epoxy resin adhesive.
2. The oil pipe is broken. When the oil pipe is broken, wipe the broken part, apply soap, wrap cloth or tape around the broken part of the oil pipe, bind it with iron wire, and then apply a layer of soap.
3. When the oil pipe is broken, find a rubber or plastic pipe suitable for the diameter of the oil pipe. If the socket connection is not tight enough, both ends shall be tied tightly with iron wire to prevent oil leakage.
4. In case of oil leakage and water leakage due to sand holes in cylinder head and other parts of motor vehicle, electrician fuses of corresponding specifications can be selected according to the size of sand holes, and they can be gently smashed into the sand holes with a hammer to prevent oil leakage and water leakage.
5. The oil pipe joint leaks oil. When the motor vehicle is used, if the oil pipe joint of the engine leaks oil, it is mostly caused by the non sealing of the oil pipe bell mouth and oil pipe nut. Wrap cotton yarn around the lower edge of the horn, and then tighten the oil pipe nut and oil pipe joint; The bubble gum or maltose can also be chewed into a paste and coated on the seat opening of the oil pipe nut to play a sealing role after it dries and solidifies. You can also cut the artificial leather or leather pants belt into shape or smash it into the hole and install it. You can also cut a section of plastic pipe and install it.
6. If the sedimentation cup is broken, cover the inlet and outlet oil pipes of the sedimentation cup with adhesive tape pipe or plastic pipe to make the oil pass through without passing through the sedimentation cup.
7. When the inlet and outlet hoses are not broken, wrap the water leakage with a cloth coated with soap; If the rupture is large, cut off the broken part of the hose, put a bamboo pipe or iron pipe in the middle, and bind it tightly with iron wire.
8. If the fan belt is broken, tie the broken belt in series with iron wire or drive the car away by starting and stopping.
9. Screw hole sliding buckle screw hole sliding buckle causes oil leakage or looseness of connecting rod, making it unable to work. At this time, the original screw can be hammered flat with a hammer to increase the expansion on both sides, and then fastened. However, it cannot be disassembled for many times, and it will be repaired during the next maintenance.
This article is provided by Jinan Audi. Our website is: http://www.sdrunao.com We will serve you with wholehearted enthusiasm. Welcome to visit