Today, some netizens asked me how to clear the maintenance tips of Mercedes Benz. Xiaobian checked some information on the Internet, and then according to his personal experience, I hope to help you.
Method / step
Method 1: there is a maintenance prompt in the dashboard. It is estimated that your car is about to be serviced. If you have to do maintenance, the 4S store will reset it for you, and the maintenance prompt will disappear. After that, when you are close to the next maintenance mileage (or days), you will be reminded again. The reset method is: turn on the ignition switch for the first gear, then adjust the display interface of the instrument panel to the odometer interface, then press the telephone key of the function key group on the right side of the steering wheel, and then press the OK key of the function key group on the left side of the steering wheel immediately. The instrument will give a prompt, and press the corresponding key according to the prompt. It is not recommended to reset by yourself. Generally, it can only be reset after maintenance. 2、 If the maintenance prompt is cancelled forever, you have to go to the 4S store to set it with the Mercedes Benz Das diagnostic instrument, but it is not recommended to do so. If there is no maintenance prompt system, sometimes your car can't be maintained in time, causing damage to the car. Benz maintenance
Method 2: maintenance Zero steps: key to 1 gear, press the return arrow on the right side of the steering wheel, the instrument displays the mileage interface. At the same time, press and hold the OK and telephone keys in the middle of the left and right steering wheel until the voltage is displayed on the menu of the repair shop. Use the up and down keys to switch to the maintenance line, select the appropriate option according to the prompt through the direction keys, and confirm with OK until the prompt maintenance has been reset. If maintenance is not done, do not eliminate it. Hide it with the return arrow on the right side of the steering wheel
Method 3: press and hold the call key in gear 1 of ignition switch together with the OK key for 5 seconds (pay attention to press the call key first) and the menu will come out. Select the asststplus maintenance code and press OK. After entering the menu, select the whole set of maintenance OK key, select confirm the whole set of maintenance and press OK key. Will you prompt for maintenance? Select Yes and then OK - select OK and then turn off the ignition when the prompt cannot be completed
Method 4: first, emphasize that all operations are completed in the steering wheel. First, turn the key to the second gear and press the arrow on the side of the steering wheel to find the mileage interface. Then press the answer key on the steering wheel side and the OK key on the steering wheel side at the same time. First press the answer key and then press the OK key. In this way, the success rate will be pushed until the interface as shown in the figure is released. Then press the side arrow to select as systplus and press OK to enter the option. After entering, select the arrow as shown in the figure to confirm the whole set of maintenance and press OK. After entering, select and press OK. Then select OK and press OK. The prompt has been cleared so far. There will be another prompt before driving