热门搜索:

济南奥迪专修

,

济南宝马专修

,

济南奔驰汽车维修

站内 站外
新闻列表
产品中心
联系我们

联系:王经理

手机: 15066665099

电话: 0531-68788899

传真: 0531-68788899

邮箱:

网址:www.sdrunao.com

地址: 济南市历城区花园东路与奥体西路交叉口往西200米

您现在的位置:首页 > 新闻信息 > 详细内容新闻详细

奥迪A6怎么重新设定大灯

来源:http://www.sdrunao.com/news/27.html
发布时间:2016-12-08

  济南奥迪维修告诉你奥迪A6怎么重新设定大灯?奥迪A6换完大灯后,仪表的大灯远程指示故障灯亮,要重新设定大灯。济南奥迪维修基本设定操作:
  Ji'nan Audi repair tell you how to reset the Audi A6 headlight? Audi A6 for the end of the headlight, the instrument's headlight remote indication fault lights, to re set the headlights. Ji'nan Audi maintenance basic set operation:
  1)连接解码器,接通点火开关,选择“大灯范围控制55”屏幕显示功能选择界面;
  1) connect the decoder, switch on the ignition switch, select the "headlight range control 55" screen display function selection interface;
  2)选择“系统基本调整04”屏幕显示“输入显示组号”;
  2) select the "04 basic system adjustment" screen "enter display";
  3)按“00”和“1”键,按“确认”键,显示屏显示“请等待”;显示屏显示运动调整位置,此过程持续20秒,接着显示“调节前照灯”;
  3) press "00" and "1" key, press "confirm" key, the display screen shows "please wait"; the display screen displays the movement to adjust the position, this process continues for 20 seconds, and then displays "adjust the headlight";奥迪专修
  4)济南奥迪维修进行前照灯调整,将新检测屏(不带15度调整线),放于车前10m处,检查内容有:打开近光灯,检查水平的亮暗;是否在垂直方向通过中央点;济南奥迪维修检查光束是否在垂直的右侧。如果检查结果不符合要求,应进行调整,调整时要用十字旋具转动相应的滤花小轮;
  4) Ji'nan Audi repair for the headlight adjustment, the new detection screen (without adjustment of 15 degrees on the front line), 10m, check the contents are: open the lamp, check the level of light and dark; whether in the vertical direction through the central point; Ji'nan Audi maintenance inspection in the vertical beam is right. If the test results do not meet the requirements, should be adjusted, adjusted to turn the corresponding filter with a cross screwdriver take ferry;
  5)调整后按“确认”,再次选择“系统基本调整”功能,按“确认”;
  5) adjusted according to "confirmation", once again choose "system basic adjustment" function, according to "confirm"";
  6)按“00”和“2”,按“确认”,屏幕显示“已学习调整位值”;
  6) press "00" and "2", press "confirm", the screen shows "has learned to adjust the position value";
  7)按“确认”,选择“查询故障存储值”功能,检查有无故障储存;
  7) press the "confirmation", select "check the value of the stored value" function, check whether there is trouble free;
  8)若无故障,退出,关闭点火开关,济南奥迪维修断开诊断仪连接。
  8) if there is no fault, quit, switch off the ignition switch, Ji'nan Audi repair disconnect diagnostic instrument connection.
  若是您还有其他方面不明白的,欢迎您与我们联系,我们会为您提供完美的服务!
  If you still have other aspects do not understand, you are welcome to contact us, we will provide you with the perfect service!

上一条:济南专业宝马维修人员介绍离合器故障问题
下一条:教你4招远离奔驰汽车发动机突然熄火
相关标签:济南奥迪专修,
相关新闻
相关产品